Capturing a sense of motion with shutter speed
A common issue some people have is getting their images to portray a sense of movement. Today we are going to look at how adjusting our shutter speed can help achieve the desired look that we want. For this simple example we will look at a ceiling fan taken at different shutter speeds so you can see how adjusting the shutter speed through an entire typical range can help you achieve the exact look you are aiming for.
Often we try to use the fastest shutter speed possible to help avoid blur but when shooting a moving object you sometimes need some amount of blur or it can look like the subject of the image is sitting still. In many cases you want to have the sense of movement to help convey the story of the object.In the case of the ceiling fan we want to show a little movement of the blades since the moving blades is going to be more typical of what you would see by looking at the fan once installed. We also want to show that this is a five-bladed fan so we have to be careful not to have too much blur that we lose all the details.
Let’s take a look at a series of shots taken at different shutter speeds:
As you can see the photos taken at the two extreme ranges show either far too much blur or not enough blur to make for a good image. The photo taken at 1/40th maintains a little more detail than the images shot at 1/25 making it a more suitable image for our use.
Summary
The whole point here is to get you to experiment more with shutter speeds to capture a sense of movement, action, or speed. By adjusting the shutter speed you can control how much or how little the blur effect will have.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.