Making Sharper Wildlife Photographs

Paul Burwell

If there is one area that seems to flummox more aspiring wildlife photographers it is the subject of making sharp images. You’d think that with today’s modern cameras and equipment that there’d be no problem going home with sharp images after each wildlife encounter. Un fortunately, that isn’t the case and I’m going to provide you with some tips and tricks to make sure you’ve got the best possible chance of making sharp images.

Mountain Bluebird with prey: Canon EOS Digital Rebel, Canon 100-400 F4.5-5.6L IS lens @400mm, 1/800th of a second at F8, ISO 400 – Hand held

Lenses

One of the truisms in wildlife photography is that it is virtually impossible to have too much lens. This means it is extremely rare that the wildlife critter you are trying to photograph is too big in your viewfinder and in fact the opposite is much more common. Not everyone can afford one of the prime super-telephoto lenses that the major manufacturers produce. These lenses in the range of 300mm to 800mm can set you back anywhere between $5,000 and $11,000 respectively. Unless you’re a pro or a serious amateur with a healthy bank balance, these lenses aren’t feasible for the average user.
So, what’s a person to do? My recommendation is to purchase the largest telephoto lens you can afford. And when you’re looking at telephoto lenses, you want the biggest number of millimetres that you can afford. Common lens lengths include 200mm, 300mm and 400mm.
If you end up purchasing a zoom lens, look for one that has the shortest range possible. Why? Because in general, the more extreme the range the lens covers, the lower the quality at all those ranges. Therefore, I’d choose a lens that gives a range of 70-300mm over a lens that gives a 35-3500mm range every time. You also want to purchase the fastest lens you can afford. All lenses have a maximum aperture they can photograph at.
A lens rated at F2.8 is two stops faster than a lens rated at F5.6 and allows four times as much light to reach the camera’s sensor. Because wildlife is often photographed under challenging lighting conditions, a faster lens allows for faster shutter speeds which equals sharper images.

Long-tailed Weasel pauses outside of ground squirrel burrow: Canon EOS Digital Rebel, Canon 500mm F4L IS, 1.4x Extender II @ 700mm, 1/500th of a second at F7.1, ISO 200 – Hand held

Teleconverters/Extenders

I also recommend purchasing a teleconverter (or extender). Teleconverters are rated by the number of times they magnify your lenses range. So, if you’re using a 1.4x teleconverter on a 300mm lens, you’ve now got yourself a 420mm lens. Unfortunately, this comes at the cost of some light and so if your 300mm lens was rated at F2.8, a 1.4x teleconverter will cost you one stop of light and it will effectively become a 420mm F4.0 lens. Stay away from the two-times (2.0x) teleconverters unless you happen to own one of those multi-thousand dollar prime super-telephoto lenses we were discussing earlier.
You’ll often hear that teleconverters degrade the quality of the image and this is true, but there is a trick for overcoming this problem. The solution? Stopping down up to a full stop. If you’re not familiar with the terminology, stopping down means using a smaller aperture setting (smaller aperture == larger f-stop number).
While it is a general practice to photograph wildlife wide open (at the lenses largest opening or smallest f-stop) to separate the subject from the background, I recommend practicing with your lens/teleconverter combination to see how much you need to stop down to make sharper images. Depending on the lens I’m using, I find I need to stop down between 1/3 of a stop up to a full stop.

Support

What else can you do to get sharper images? Use some sort of support. I’ve met a few photographers who have no problem making sharp images hand-holding over 6.5kg (14 pounds) but the majority of people will make sharper images using support. Buy the highest quality tripod you can afford. Make sure the tripod is rated to support at least the amount of weight you’re going to put on it. High quality tripods can be pretty pricey but another alternative to consider that will also give your camera/lens combinations great support is a monopod.
These handy devices also provide excellent support for even the heaviest equipment and they are a lot easier to pack and move about. If you want to save some money, (and who doesn’t), consider purchasing aluminum tripods and monopods over carbon fibre. They aren’t quite as light and they get cold as heck in the winter, but they are strong and a whole lot more affordable.
So, now that you’ve got yourself the best wildlife photography equipment your pocket book will allow, stay tuned for my next column (next week) where I’ll give you the tips and tricks you’ll need to make the sharpest photographs possible. Update: read Part 2 of this series here.
Until then, get out there and practice, practice, practice!. Photograph ducks at the local pond or go to a dog park and capture some of the action there. Regardless of whether you are in a remote location or on your own back deck, the more familiar you are with your equipment, the better chance you’ll have of making an award winning shot.

Share this article.

5 Tips for Getting Sharper Images

By: Darlene Hildebrandt 

An important element of photography is getting sharp, crisp images. You may be struggling with focus, especially if you are fairly new to DSLR photography. It is extremely frustrating to go out shooting, assuming you’ve got nice clear, sharp images, only to get home to find out they aren’t quite as sharp, or even in focus, as you had hoped.
There are several things you can do to improve your chances of getting sharper images. Here are a few to get you started, if you have other tips please share them in the comments below.

Five steps for achieving sharp images

#1 Pick the focus point manually

On most SLRs, and some of the mirrorless or four thirds cameras, there is an option of selecting what point it uses to focus. Meaning, when you look through the camera and see some flashing dots or squares (or something similar to the image on the right), those are your focus zones or spots. Make sure it is NOT set for the camera selecting which of those spots are targeted for focusing. When the camera chooses where to focus it can often pick the wrong thing. If you have a subject that is behind something in the foreground the camera will usually pick the closest object, which is not your intention, and you’ll end up with the wrong thing in focus.
Find the setting that allows you to adjust which target focus zone the camera uses to focus. Depending on the camera make and model, that can usually be adjusted with a dial or joy stick on the back of the camera, while you are looking through the view finder. This frees you to choose the most appropriate zone or spot for your subject or scene.

#2 Select the right focus mode

Most cameras have a few different types of focus modes. On Canon you’ll see them as Single (One Shot), AI (stands for Artificial Intelligence) Focus and AI Servo. On Nikon the modes are AF-S, AF-C and AF-A.  Choose the one that bests fits for the subject you’re photographing.
Single (or AF-S) means that the camera will focus and lock on a single object and will not refocus until you release your finger from the shutter button. AI Servo (AF-C) is for continuous focusing when you have a moving subject.  In this mode when you depress the shutter button half way, the camera will continue to focus on the subject as it moves away or towards you. It does not lock focus until you press the button down fully and take the photo. In AI Focus (AF-C) the camera will choose between the previous two based on whether the subject is moving or not.

#3 Set your minimum shutter speed accordingly

There is much debate about this subject in terms of how slow is too slow for hand holding your camera. Some instructors will say 1/60th of a second, I tend to use another rule of thumb which is 1 over the focal length of your lens. So if you are shooting with a 200mm lens, then 1/200 is how fast you need to be shooting to get rid of blur caused by camera shake. The longer lens you select, the more amplified any movement will become. If you are shooting with a cropped sensor camera, remember that 200mm is now acting like a 350mm so that changes your minimum shutter speed to 1/400. If you use a lens that has image stabilization then you can often stretch it a little bit more, say one or two stops, depending on how steady your hands are. You also want to make sure you are holding your camera in the most stable position with your left hand UNDER the body and lens (sort of cupping it) and both elbows in tight to your body. Then, hold your breath and shoot!

#4 Make use of back button focusing

Another much debated topic is whether or not to use the back button focusing option now available on most DSLRs. I’m not here to get into that debate, if you want to know more about it you can read 3 Reasons Why You Should Switch to Back Button Focus by James Brandon. The basic idea is that instead of using your shutter button to focus, you separate the focus function to a button on the back of the camera, that you press with your thumb.

Taken using back-button focus

I use it for many things including; portraits where I want the subjects off centre and don’t want to do “focus, lock, recompose” for every frame, any time I want to focus on a moving target (you have a better chance of getting it sharp this way than with the shutter button focus), for HDR photography when I’m bracketing and don’t want the focus to shift accidentally between shots, for night photography when I focus with the assistance of a flashlight and don’t want it to move afterwards (other option is switch to manual focus every time but it’s too easy to forget to focus at all then).
It does take a little getting use to, but after a friend of mine that shoots sports for the local newspaper showed me how to use it properly I never looked back. So when she says it’s better for action focus on critical, fast moving subjects, I listen cause she knows what she’s talking about!

#5 Use a tripod and remote trigger or release

Tri-pod = three legs. Three is better than two right? In some the case of photography – yes! The tripod is your friend.
I think you know what they are and what they’re for, but not many photographers own one or use it. Placing your camera on a tripod will help you get sharper images, if you’re doing it right. Get a good sturdy one, don’t cheap out on a $49 tripod on sale at the big box store and put your $2000 SLR on it. Do you put cheap tires on your high end sports car – I think not! A flimsy tripod won’t do you any good if it can’t hold the weight of your camera and is constantly slipping or loosening. Worse case scenario has your whole rig crashing to the ground, not good. Invest in a good one, do some research, make sure it is made for still photos not video, and it can hold the weight of your camera. A lightweight one made of carbon fibre is a good option, but expect to pay more for that option.
In addition to a tripod I also suggest getting a remove trigger or shutter release. They come in a few varieties including ones that attach directly to the camera, wireless ones, and even fancy programmable ones for doing timed exposures and auto exposure brackets. Like anything, the more fancy shmancy features you want, the more $$$ you will pay. But do get one, because it allows you to fire the camera without touching it, thus reducing any possible vibrations during the exposure. I also tell my students to turn of the IS (or VR) on their lens once the camera is on tripod. This is because the IS/VR runs a little motor inside the lens that vibrates it to help compensate for camera shake. On tripod you do NOT want your lens vibrating, even a tiny bit. The camera manufacturers would like us to believe that their cameras are smart enough to know when that’s happened and turn off the IS automatically. Maybe they are. Maybe they aren’t. I like to take no chances, so I just turn it off.

Me playing with a view camera at a mock western town in AZ. The guy posing as the photographer let me have a look through it, for old times sake.

When I started photography school (technical college) the first camera they allowed us to use was a 4×5″ view camera. If you’ve ever seen one you’ll know it’s not possible to use it without a tripod. In hindsight, some 25 years later, I think those photo school instructors were actually pretty smart! At the time I just thought they wanted us to suffer hauling all this heavy gear around. By putting the camera on a tripod you will instantly slow down and put more time into setting up your shot. With the advent of digital and the popularity of SLRs and now even micro four thirds and mirror-less cameras, it’s become so easy to just grab the camera and fire off a few images. So besides the obvious benefit of stabilizing your camera so you can shoot at slower shutter speeds then we discussed in #3 above (if you want to do night photography it’s essential), using a tripod also forces you to put a little more time and effort into it. I find when that happens it often results in a better image aesthetically as well as technically.
Well this was a longer tip than I expected to write, whew!  To sum up, if you are having trouble with blurry images, try these tips out for yourself. I’m pretty sure you’ll have a bit more success.
So give it a go, and let me know how it’s working for you!

Share this article.

Damaged chameleon

Viral video - Cell phone video, Inspiration for you videographers considering a topic for your next project.  20,500 views on Facebook. Your video may receive more.
 

Advertisement

Get Paid To Take Photos!

• Make an extra or full-time living from your Photography!
• Work at home, make money no matter where you are in the world!
• Turn your hobby into a profitable business
• Upload and instantly sell to millions of potential buyers
• Receive payments via paypal, wire transfer or mailed checks
• Grab your camera and start a high-paying career in photography today! 

Use this link to get your FREE 7 day trial:
https://www.photography-jobs.net/?hop=darryl54

$8,000,000 is the amount our happy members have been paid to date. And now it’s YOUR TURN to get paid to take photos...

9 Ways to Ensure You Get Sharp Images When Photographing People

By: Emily Supiot   

If you are struggling with soft or blurry images, you are not alone. Many photographers have difficulty with getting crisp, clear, in-focus images. This is especially true when taking pictures of people. It can be done, though, if you take the right steps. Try out these nine tips to make sure you get sharp images when you are photographing people. With a little practice, you should start seeing results right away.

1. Shutter Speed

If you set your shutter speed too slow, chances are that your images are not going to be as sharp as you want them to be. Make sure to set your shutter speed at least the same speed as the focal length of your lens. To be extra sure, you could even double it.
For example, if you are shooting with a 35mm lens, make sure your shutter speed is set to 1/35th (doubled – 1/70th) or faster. If you are shooting with an 85mm lens, set the shutter speed to 1/90th (double to 1/170th) or faster.

Shutter speed 1/1640th of a second.

2. Steady Hands

To hold your camera steady, firmly plant your hands on your camera and make sure that you are not shaking, even slightly. Ideally, a tripod could eliminate the possibility of this, but if you are shooting handheld, make sure to keep things as steady as you can. Even the slightest movement could cause your photo to become out of focus.

Shot handheld.

3. Set Your Focal Point

There are a few ways to set your focus, but one great way is to set your focal point to the center focal point on your camera and focus in on the person you want to photograph. You can change the points around, but generally, the center one will give you the clearest focus.

Shot with the camera set to the center focal point.

4. Look at the Eyes

If you are taking a photo of just one person, set your focus on their eyes. The eyes are generally what will stand out in a great portrait, so making sure that they are in focus is key. Remember those focal points? Make sure that center one is lined up right on their eye.

Note: if the person is posed slightly sideways, always focus on the eye closest to the camera.

5. Pose Them

If you are taking a photo with more than one person or a family, the way you pose them can affect the sharpness and focus. An easy pose which helps to make sure the focus will stay sharp is lining them up. Keep everyone on the same plane (equidistant from the lens). This will be helpful especially if you are still learning manual shooting mode, and working with your aperture. When you pose a group of people for a picture and they are in multiple lines, or if you have some closer to the camera, while others are farther away, this could make it more difficult to get everyone in sharp focus.

6. Setting Your Aperture

The wider you set your aperture, the greater the chance there may be some parts of the image that are out of focus. Remember how you’re going to pose them? When you pose the people in a line on the same plane, you can keep your aperture wider and lower the risk for a blurry photo. It is also easier to shoot with a wider aperture if you are just photographing one individual.

Shot at aperture f/2.2

7. Focus on the Person Closest to You

If there are many people in your photo, set the focal point on the person closest to you. Ideally, this person will also be in the center of the group. This will help to make sure that they are in focus as well as any people in the photo that are behind them. Then, adjust your aperture to make sure all group members will be in focus.

8. Choose Your Lens

Not all lenses are created the same and some are better at capturing sharp images than others. It’s not necessarily always the most expensive lenses either. A good starter lens that has great focus and won’t break your bank account is the 50mm f/1.8. A few other great lenses that generally produce sharp photos and aren’t as pricey are the 85mm f/1.8 or the 50mm f/1.4.

Shot with a 50mm f/1.4 lens.

9. Clean Your Gear

If you’ve tried all these steps and you are still experiencing soft, blurry pictures, it may be time to clean your equipment. If it’s been awhile (or if you’ve never had it cleaned), take your camera and lenses into a local camera shop you trust and have them clean your gear for you. Hopefully, that will make a big different in the sharpness of your images.
Now you try it. Next time you go out to photo shoot, think about these steps and carefully plan to get sharp images. Don’t just assume it’s automatically going to happen. With practice you will get it, so keep trying.

Share this article.

Getting Sharper Images – an Understanding of Focus Modes

By: Jake Hicks

The longer you shoot, the larger the repertoire of subjects and assignments you photograph becomes. You start off photographing flowers in the garden, your neighbour’s dog, your sister’s kids, your friend’s wedding and then before you know it you’re doing product shots for your friend’s new company. All this happens over time and there is one pretty fundamental skill that must remain paramount throughout out your process, properly focused images. Sure we’ve all been there, we’ve all taken that shot once in while which is slightly soft (a polite photographer’s term to describe out-of-focus images). But, it’s a great shot so we keep it anyway, even tho we would still have preferred it to be tack sharp.

In focus images have been one of the most fundamental rules of photography right from the dawn of the craft. In the early 1900s it was a craft in its own right, but in the 1960s Leica introduced a rudimentary autofocus system that changed everything. Since then, autofocus has developed dramatically and it’s no longer a feature on cameras, it’s a given.
So, bringing autofocus up-to-date you have a few options to choose from in your modern DSLR. Those are some of the features I will cover in this article, along with when to use them. Both Canon and Nikon have very similar settings, albeit incorporating different technologies the results are very similar. There are also other brands like Sony and Olympus etc., that also follow suit, but here I will be discussing the four main focus modes in Canon and Nikon.
This image above was shot utilizing the AF-S (Nikon) or One Shot (Canon) autofocus mode on the camera. Here I focused on the models eyes and then recomposed my image so that she was over to the left of the frame, allowing for more space in the image in the direction she is looking.

Single Shot Mode

First off, you have the mode that’s probably been around the longest – Canon’s One Shot and Nikon’s AF-S. Both of these will do pretty much the same thing. This mode is predominantly used for stationary objects like model shoots (most of the time – more on when not to use it for model shoots later) and anything that doesn’t require your subject to move around too much in the frame. You half press the shutter in this mode, and then you can recompose the image. For example, you focus on the model’s eyes, then recompose to put her on the left hand side of the image. This autofocus mode will get you through most situations.

Active or Continuous Focus Modes

Next we have the step up from the single focus to Canon’s AI Servo, and Nikon’s AF-C modes. Essentially what this setting does is to continuously track your initial focus point and readjust the focus accordingly. This setting is ideal for moving subjects like active children, and pets that are constantly on the move.

Auto Modes

Finally out of the autofocus settings we have Canon’s AI Focus, and Nikon’s AF-A. Both of these settings actually leave it up to the camera to decide which is best out of the other two focusing modes to use. In this mode it will either choose to continuously track your chosen subject should it decide to move, or focus lock if you would like to recompose. In theory, then I needn’t of bothered explaining the other two settings as surely this is the best of both worlds? Not quite. I personally have tested this mode a fair amount with stop-start subjects and although the camera does a good job of keeping up with them it’s always more accurate to use continuous focus mode. The same also goes for its ability to determine when a subject has stopped and when to focus lock for recomposing. Personally I never use this mode as although it has the best of both, it also has the worst of both.

Image above taken with an 85mm f/1.8 prime lens using manual focus. Shooting in manual focus negates the need to recompose and loose focus in autofocus modes.
So, although I have just covered the three basic settings here very briefly, there is, of course, a whole of host other technological advancements in autofocus that I haven’t covered. I know Nikon has extensive, matrix and 3D autofocusing features. As well most modern DSLR have incorporated the “back button autofocus” which also helps with focus locking. But going over all of that is not the purpose of this article.

Manual Focus Mode

The last focus mode I wanted to cover and one that is rarely used is the Manual focus mode. This mode strikes fear into the heart of nearly all modern photographers and that’s simply because they’ve probably never used it. Do you ever need to use it? That is something that only you can decide and is probably based on the type of photographs you take. If you only ever take portraits of energetic kids or fast paced sports, then autofocus is probably always your go-to mode. If however you shoot still life, architecture, landscapes and other detailed, relatively motionless subjects, then manual focus is probably a good way to go.
There are a few reasons for this. Landscape photographers will want to find the hyperfocal distance of their scene to maximize the amount of in-focus points (depth of field) in the image. This is based on an equation so autofocusing on a specific object is not always the way to go. Still life photographers will usually have their camera locked-down on a tripod so they will not want to focus and recompose once they’ve set up the shot, so it’s just far easier to focus manually. There is also another reason to want to use manual mode on some cameras and certain situations, and that was the catalyst for this article.

This version of the image was shot using the autofocus mode AF-S/One Shot, and meant that after I had focused and recomposed the shot, the model’s eyes were left out of focus.
I recently purchased an 85mm f/1.8 prime lens, and I wanted to test the lens out and see what the sharpness was like at f/1.8. I predominately only photograph models so I set up my test and went about taking some shots at f/1.8 using my usual AF-S/One Shot autofocusing mode. When I got my shots back to the computer to take a look, I was surprised to see that most of them were very soft. It took a few minutes to realize my error and since then I’ve adjusted how I shoot with these parameters.

Here you can see that the selected focal node is still situated in the middle of the viewfinder even though I have elected the outer most one when shooting in the portrait format.
I haven’t done a lot of very shallow depth of field shots up until this point so I hadn’t seen the now exaggerated results of my
poor focusing technique previously. At f/1.8 you have a very, very shallow amount in focus (depth of field). For example, a head shot with the eyes in focus, the tip of the subject’s nose will be out of focus. For the test I was photographing the model at 3/4 length and shooting up at her so my camera height was probably about her waist height. I was about 6 feet (2 meters) away from her and I was focusing on her eyes with my focal point in camera then recomposing my shot to capture the 3/4 length crop. The problem with most cameras is that although they have a lot of focusing points, they’re all clustered in the centre of the viewfinder so even though I chose the outer most focal point I still have a dramatic amount of recomposing to do.

The diagram above clearly illustrates what’s actually going on when you recompose an image after focusing in AF-S/One Shot autofocus mode. The actual part of the image that was in focus, is now out of focus.
This isn’t normally a noticeable problem when recomposing at f/16, but at f/1.8 that dramatic shift in the focal plane means the resulting image is very soft around the model’s eyes. As I recomposed it actually repositioned my focal point further back behind the model, meaning the back of her head and hair were in focus but not her eyes.
There aren’t too many ways around this pesky little issue, especially as you may not notice it on the back of the camera’s little screen. One thing that did resolve it though was by switching to manual focus. I could then compose my shot and manually focus on the model’s eyes, resulting in a fantastically sharp image where I wanted it to be sharp.
Granted there were a few things conspiring together here to really exaggerate the issue. Firstly, I was shooting at f/1.8, that’s always going to rely on critical sharpness. Secondly, I was down low shooting up. This always exaggerates the focal plane shift when recomposing and lastly I was stuck with limited focal nodes. There are many technical reasons why modern DSLRs don’t allow focal nodes towards the edges. A lot of smaller frame cameras like the mirrorless, APS-C and micro 4/3 cameras all have selectable focal nodes covering the viewfinder, but alas, DSLR technology isn’t there yet. Until it is, it’s a good idea to be aware of what’s going on in autofocus modes on your camera, and be prepared and ready to switch to manual focus when required.
Good Luck!

Share this article.

Happy Memorial Day!

You want cheese?

Viral video - Cell phone video, Inspiration for you videographers considering a topic for your next project.  6,500 views on Facebook. Your video may receive more.



$7.99   Get your copy here: https://amzn.to/3b76mGJ

(Pssst...as good a deal as this is at only $7.99, how would you like to have access to the Smartphone Filmmaking Handbook absolutely FREE?  Just scroll down to the bottom of this page and click on the Amazon Kindle Unlimited Access offer)

Photography FREEBIE

Try either of these EBooks FREE for 30 days.  Just click on the link below and get a FREE 30 day trial membership.  If you choose to cancel before day 30 you owe nothing.

Kindle Unlimited Membership Plans

 

 

Share this page with your friends.

 

 

 

 

Advanced Tips for Tack Sharp Images

By: James Brandon

One very common question I get from photographers is why they can never get their images as sharp as the ones they see online. This is a loaded question, and it really made me think about all the things I go through to get tack sharp focus on my images. Sure there are the obvious tips like holding the camera properly, squeezing the shutter instead of stabbing it, tucking your elbows in, and so on. The truth is, that is just the beginning to taking sharper photographs.
Let me start off by saying that I still take blurry images from time to time. All professional photographers do. The only difference is that we don’t post them online! However, I will also bet that I take far less than most other photographers, and there are clear reasons as to why. Getting sharp images involves a combination of a few different techniques, and when put together they will produce a far higher success rate of sharp images.

Back Button Auto-Focus

I can honestly say that about 90% of the photographers I talk to don’t use this built in feature on almost all cameras. Whenever I ask photographers how they focus on a subject, the response is that they press the shutter half way down to focus, then all the way down to take the picture. The problem with this is that EVERY time you take a picture, your camera is going to re-focus the frame. What if your subject is a far away person and there is a crowd of people walking between you? You can’t just set your focus distance and fire away. Instead you have to wait for line of site to your subject and hope nobody walks by while you focus each time.
On most (nearly all) cameras, there is a button on the back of the camera titled “AF On.” Through your menu settings, you can set this button as your focus trigger. This way, you set your focus then fire off as many shots as you need to. The focus point stays the same through all shots and the shutter is free to be used as just that, a shutter.
Read more about Back Button Focus in James’ post – 3 Reasons Why You Should Switch To Back Button Focus

Single Point AF

One of the many revelations that photographers have is discovering the difference between letting your camera decide how to do something, and telling your camera what to do. Most photographers press their shutter down halfway and the camera decides what to focus on. More often than not, it picks the right thing. This is normally because the subject is prominent in the frame and the camera can easily find a contrasting element to focus on. Using this simple method is fine in a lot of cases, but if you begin to venture into prime lenses and shallow depth of fields, your images will begin to suffer greatly.
If your subject is 10 feet away and you’re shooting f/2.8 at 200mm, your depth of field is only 1 1/2 inches deep! That means that your subject will come into focus at 9.94 feet away, and drop out of focus at 10.06 feet away. Do you want to leave a 1.5 inch depth of field up to your camera? What if it focuses on the tip of the nose? Now your subjects eyes are out of focus.
Your camera should have a button (top right in image) that shows how the camera is focusing. The default is to have all the focus points on and the camera uses those points to decide where to focus. Instead, press the focus grid button and use the joy stick (bottom left in image) to decide where to set your focus point. Instead of a bunch of focus points popping up when your go to focus your subject, you will now only see the single focus point that you set. Now if you want to focus on your subjects eye, place your selected focus point over the eye and simply tap your AF-ON button. Your focus is now set for that mark in the frame. The only thing you need to worry about now is movement.

AI Servo Focus Tracking

Funny name, serious setting. Getting your camera off of “One Shot” can be revolutionary to your photography if you have yet to discover Servo focus mode. Here’s an example of how Servo works: You’re shooting a wedding during the end of the ceremony. You are at the end of the aisle and the wedding party is walking down toward you. You are shooting at f/2.8 because it’s dark and you want to let in as much light as possible. Your depth of field is 6 inches. With “One Shot,” your camera only focuses on the subject each time the focus button is pressed. You then have to press the shutter to take the picture. With a depth of field of 6 inches, and the wedding party walking towards you in groups of two, your window of opportunity to get your shot in focus is incredibly small. One strategy is to just try and be quick, pressing the focus button and shutter in succession as quickly as possible. Another strategy is to set a mark on the aisle as a window of opportunity and wait for each person to hit that mark, then take the picture. This is hit or miss though, and you only have one chance. You don’t want to take chances like this at a wedding!
Enter AI Servo
When you switch your camera over to AI Servo, everything changes. Servo was introduced as a standard camera setting all the way back in the 80’s, by request of several sports photographers who needed a better way of ensuring focus on moving subjects. With Servo activated, now your camera will track focus on the wedding party as they move toward you, and will keep updating every step of the way. This works whether the subject is coming toward, or moving away from you. In your menu settings, you can even adjust the sensitivity of the focus tracking.

Examples Using These Tips

This shot is from a meet and greet session with the band Jars of Clay, at a concert in Austin, Texas. The manager told everyone not to worry about taking pictures until after the show because any meet and greet pictures would be boring. I took that as a challenge. I sat patiently for the right moment and when I saw their lead singer make eye contact with my lens, I fired away.
With normal focus methods, this shot may not have been possible, and I don’t like taking chances. If I used grid focus, how would my camera know to focus on HIS face, and not something else in the frame? Instead of using the entire focus grid, I turned on a single auto focus point and placed that point over the lead singers face. I then used my back button to focus that point over his face and waited for the right moment. When he looked my way, everything was already done, all I had to do was hold down the shutter.

This is one of my favorite pictures I’ve taken. It’s my nephew Will being spun around by his dad Billy (my brother in law). I think the image embodies the love between a father and a son, and what better backdrop than fair grounds? With factory set focus methods, the probability of pulling off this shot would have been slim to none. Sure, you can spray and pray, and hopefully you will end up with a keeper, but what if you don’t? The moment is gone! For this shot, I had a single point activated in my focus grid and used AI-Servo to track my nephew as he spun around in circles. Because I had back button auto focus on and Servo tracking, I was able to hold down the focus button to track focus as he spun around. This allowed me to track focus using my thumb and hold down the shutter with my index finger. Trust me, this stuff becomes crucial when you start using shallow depth of field like in this shot.

I took this shot during a family shoot last spring. I was having a tough time getting this little guy to open up to the camera and I had to figure something out quick. I noticed a ledge (as seen in the background) and made a bet with him that there was just no way he could jump off that ledge because it was only for big boys. Well, that was all it took! Within seconds he was up on the ledge with a smile on his face, ready to prove me wrong. Again, I used Servo focus tracking and held it down during the jump using back button focus. I grabbed this frame as he made a bit of a rough landing.

This image was taken at Carlsbad State Beach in southern California. This surfer girl noticed my camera and came running up the beach to greet me and talk photography. She was also a photog and wanted to make sure I didn’t get a shot of her wiping out! As she walked back out to catch some more waves, I grabbed this shot of her. I placed a single AF point over her back, then held down Servo focus tracking so my camera would keep her in focus as she walked away. When the moment was right, I held down the shutter to capture a hand full of frames. This was the winner.

These focus tips completely rocked my world when I discovered them, and they will always be part of my work flow, now and in the future. I probably use AI Servo about 90% of the time. The only time I don’t is when it’s too dark for the camera to focus without an assist beam from a flash. To use a flashes focus assist grid you have to be in “One Shot” instead of AI Servo (at least as far as I can tell). I don’t see any reason to ever go back to using my shutter button for focusing. I have never looked back on that front! And as far as grid or single point AF goes, it’s pretty much the same story. I use my entire grid maybe 1% of the time.
If these tips are new to you, I urge you to stop what you are doing and give them a shot. I will admit, using back button focus and single AF points takes some getting used to, but eventually it becomes second nature. At this point, I can switch focus points on my grid in the blink of an eye, and using the back button for focus is instrumental in placing those points of focus on their targets.
Call to Action
Let us know if these tips have helped you! Use the comment section below to post links to examples or ask any questions you may have. Be sure to follow me on Twitter (@jamesdbrandon), I can answer questions there as well and I always try to share links of other inspirational articles and work from around the interwebs! Now go out and take some pictures!

Share this article.