7 Techniques for Original (and Stunning) Nature Photos

By: Jaymes Dempsey

Do you want to capture original nature photos?
The kind of photos that are both stunning and unique?
You can.

While capturing original nature photography might seem hard, it doesn’t have to be.
Because there are a few simple tricks that you can use…
…which will help you create original photos, consistently.
And it’s not about finding new locations.
It’s not even about finding new subjects.
Instead, it’s about looking at the subjects you have in a completely different light.
Let’s get started.

1. Use unusual lighting for surprisingly dramatic shots

For a long time, I felt like my images were frustratingly similar. I couldn’t find any new compositions. I couldn’t create the kind of magic I wanted. I felt like I had hit a wall.
Until I discovered the power of directional lighting.
Now, directional lighting is something that most photographers are familiar with. You get directional lighting when the sun is low in the sky – so that the light hits your subject from a particular direction.

If the light hits your subject from the front, it’s frontlight. If your light hits your subject from the side, it’s called sidelight.
But while frontlight and sidelight are nice enough, they pale in comparison to the power of backlight.
(Which is the type of light that completely changed my photography.)
Backlight comes from behind your subject. If you want a backlit photo, you should make sure that your subject sits between you and the sun – and then point your lens at your subject.
What’s so great about backlight?
Backlight allows you to capture intense, dramatic light. It allows you to create a contrast-heavy photo, one with a beautiful background and a detailed subject.

However, you want to be careful not to create a silhouette. If you underexpose the photo too much, the subject will lose all its detail, leaving you with nothing but a bright backdrop.
So here’s what I recommend:
Point your camera at your subject. And then crouch down so that the sun moves behind the bulk of your subject. If you can block the sun, you’ll reduce the background brightness. And you’ll be able to capture some nice detail in your subject while giving the overall shot some gorgeous background light.

One more tip:
It can be useful to let the sun fall through a background object. If there’s a tree in the background, angle yourself so the sunlight falls through the tree. This will create some spectacular bokeh.

And it’ll take your nature photos to a whole new level.

2. Shoot from strange angles for a completely new perspective

Shooting from new angles is a classic method for capturing original photos.
That’s because it works. Really, really well.
Of course, you don’t want to use the same new angles, over and over again. That will just cause you to fall into a cycle of creating similar photos once again!

Instead, try to find a new angle for every subject you photograph.
I’m a fan of getting down low, and I recommend you try it, too. Crouching, crawling, or even lying on the ground is a great way of opening up more intimate perspectives.
And more intimate perspectives can make for stunningly original images.

Another tip is to make yourself feel disoriented. Try lying on the ground, looking up at your subject. Or try climbing high above your subject, so that you’re shooting straight down.
These particular angles are just starting points. Take them and make them your own. Experiment as much as possible.
That’s how you’ll capture original photos.

3. Apply creative techniques for unique takes on a subject

Another easy way to produce original nature photos is to add something new to your photography arsenal. Something you’ve never tried before.
One way to find these techniques is to look at photographers in other genres. What are they doing that you like? What’s creative about their work? Is there something that you can take from their photos and apply to yours?
I’ll mention just a few creative techniques here. These will give you a sense of the possibilities of nature photography. And they’ll also open up new shots for you, right now.
First, one of my favorite creative techniques is freelensing. This involves detaching the lens from your camera and tilting it in different directions for a tilt-shift style image.

Freelensing will give you some striking images filled with shallow depth of field, gorgeous bokeh, and stunning light leaks.
Second, I recommend trying intentional camera movement photos (or ICM). ICM photos are beautifully abstract and impressionistic.

To capture amazing ICM photos, simply set your shutter speed to something low (in the 1/2s to 1/20s range). Then experiment with moving your camera when you take the photo.
If you persevere, you’ll soon be taking some amazing images!
Third, you should try the ‘shooting through’ technique, also known as ‘cramming.’
Find a subject – then change your angle so that you’re shooting through something in the foreground. This is generally vegetation, but it doesn’t have to be.
If you can create a shallow depth of field, you’ll blow the foreground into a beautiful wash of color. And you’ll capture some highly-unusual nature photos.

4. Create abstracts of your subjects for something impressively different

One thing I love about abstract photography?
It forces you to see your subject in a whole new light.
And that’s why abstract photography is perfect for creating fresh perspectives of a subject.

But this leads to the question:
How do you actually create stunning abstracts?
I have a few tips:
First, get close. For abstract photos, closer is almost always better.
Two, try to think in terms of shapes and lines, rather than subjects. Compose while keeping these geometric elements in mind.

Third, be careful not to underexpose your photos. It’s easy to do this with close-up abstract photography because you lose light as your lens focuses closer. So make sure to compensate for this possibility.
Finally, use your viewfinder a lot. Move your camera, and watch as the composition changes.
And when things start to look really good…
…take your shot!

5. Switch lenses for a fresh focal length (and fresh feel)

Sometimes, all we need to do for a fresh perspective…
…is switch lenses.

After all, you probably use the same lens for your nature photography pretty often. I know that I have a few lenses in my kit that I use regularly.
And this can cause you to get comfortable with your photography. You might struggle to find new images.
So switch lenses. And make the switch as big as possible.
If you’ve been shooting flowers with a long lens, try using something very short. If you’ve been shooting landscapes with a short lens, try to go for something long. And if you’ve been shooting birds with an ultra-telephoto, why not try something that shows far more of the environment?
Whenever I try this technique, it works wonders. The completely new perspective feels wonderfully fresh – and I get photos that I really love.

6. Find a photo you like and take something different

This technique is a tricky one.
If you can do it correctly, you’ll capture stunning original images. But if you approach it without much motivation, you’ll end up creating something boring and derivative.
Here’s how it works:
Start by finding some nature photos you like, but that were taken by other photographers.
Then recreate those photos. Recreate the setup, the composition, everything.
Finally, make three major changes to the shot.

The changes can be anything: settings, lighting, composition, and more. The point is to create a shot that’s radically different from the original, but that still captures the magic that the original possessed.
You can even use some of the techniques from elsewhere in this article. Add in a bit of ICM. Use a wildly different angle.
You’ll ultimately capture an original image. An image you can be proud of.

7. Shoot until you can’t shoot anymore, then keep shooting

Here’s one final technique for original nature photos:
Find a subject. Then photograph that subject as you normally would, taking all the obvious photos.

But then, once you’ve run out of easy ideas…
Keep going.
Keep taking photos.
And keep trying to innovate. Keep trying to find new nature images.

At first, you’ll struggle. You’ll think there’s nothing more that can be done.
But then you’ll start to have new ideas. Your mind will open up.
And that’s when you’ll get some of your most original photos!

Techniques for original (stunning) nature photos: next steps

Capturing original nature photos can be really, really tough.
Or, at least, it might seem that way.

But the truth is:
Anyone can take original nature photos! As long as they know a few simple tricks.
So as long as you follow the techniques laid out in this article…
…your nature photography will be gorgeous, stunning, and – above all – original!
Got any more tricks for original nature photos? Be sure to share them in the comments!

Share this article.

15 Tips for Successful Fireworks Photography

By: Darlene Hildebrandt

It’s getting close to fireworks time of year so today we wanted to present you with a few tips to help you photograph fireworks displays. The biggest thing to remember is that it’s all about practice, experimentation, and the following mantra (say it with me!)

SHOOT – REVIEW – ADJUST – REPEAT

Please remember that if you’ve never tried fireworks before it’s all trial and error and I’ve made a lot of mistakes myself before I got any images that I was happy to show anyone.  Each time I photograph fireworks there’s always some element that’s unpredictable so you have to learn to adapt and learn from your own mistakes, correct for next time and do it again. So take these tips to help you get started.

15 tips for fireworks photography

#1 Use the right equipment: use a sturdy tripod and remote to fire the camera  and bring an extra battery as long exposures tend to use them up quickly.  I say STURDY tripod because it needs to hold your camera steady for several seconds without sinking, tipping, or wobbling. I wrote an article on my site on Tips for buying a tripod of you need more info on what to get.

This image was actually purchased by the company that put on the fireworks show in Portland.

#2 Set your ISO low like 100 or 200, for a couple reasons. First the higher the ISO you use the more noise you’ll introduce into your images, so keep it low to prevent that. Noise also lives in blue areas of images and nighttime has a lot of blue so that compounds the issue.  Long exposures also tend to increase noise so if you add it all up you get a lot of noise so keep the ISO low to eliminate that variable.
#3 Turn OFF long exposure noise reduction.  This setting, while it does a really good job of noise reduction, adds an extra complication you don’t need when doing photography of fireworks.  The way it works is that if you take say a 10 second exposure, it takes a second one of equal length but just black (the shutter doesn’t open). Then it merges the two together and blends the blank one into the shadow areas of the first one which is where noise typically shows the most. The problem is that fireworks happen so fast you don’t want to have to wait 10 seconds to be able to see your image, make any adjustments and shoot again. I did this once my accident and it was very frustrating and I missed most of the show and did not get the results I wanted because I couldn’t review and correct.
#4 Do NOT use live view if your camera has it. This will eat up your battery really fast. Live view is really for shooting video and using the display screen so much uses a lot of power, as does making long exposures.  Save your battery for actually shooting and set up your shot using the eyecup viewfinder.

#5 set your camera on Manual mode for exposure and set your aperture to f5.6 or f8.  Those apertures are pretty optimal for fireworks as the light streaks are controlled by the size of the aperture.  Closing down more will make the light trails thinner, opening up more will make them wider and possible too over exposed.  Do some tests but all the times I’ve done fireworks I keep coming back to f8 as my preference.
#6 Set your shutter speed to between two and ten seconds.  Do a test shot before the show starts and see if the sky is too dark or too bright and adjust the exposure time accordingly. As long as you’re under 30 seconds you can let the camera time the shots for you.  Or you can switch to Bulb and just open and close manually when you feel you’ve captured enough bursts in one image.
#7 Focus your lens ahead of time, and then turn off AF otherwise the camera will keep trying to refocus every shot and you may end up with missed images or blurry fireworks if the camera misses. Assuming you’re a fair distance away from the fireworks you shouldn’t have to refocus at all unless you change your angle of view or want to focus somewhere else, like the people in front of you.
#8 Use a neutral density filter to get a longer exposure if need be.   If it’s not 100% dark out yet it (the sky still has some light) this will allow you to get a longer exposure and make sure the fireworks bursts have a nice arch.  If your exposure is too short you’ll end up with short stubby looking bursts, not the nice umbrella shaped ones. If yours are too short, just make the exposure time longer. If you are getting too many bursts in one shot and it’s coming out over exposed, shorten the exposure time.  Using the ND filter if it IS dark will also allow you to shoot longer exposures and capture more bursts per image.  Play with that and try it with and without the filter if you have one.  A polarizing filter will work to a lesser degree also.

ISO 100, f/10, 1 second – notice the bursts don’t really make a nice arch? A longer exposure will make your trails longer. You choose how you want them to appear and adjust accordingly.

#9 Shoot most of your shots at the start of the show to avoid the smoke/haze that appears a bit later. Eventually the sky will be filled with smoke and it’s not as pretty looking.  That’s when I’ll try some close ups or abstracts (keep reading for more on that later)
#10 Scout your location ahead of time and get there early to get a good spot, think about background (what’s behind the show) and if you want the people around and in front of you as part of the shot. In general the good viewing areas fill up sometimes 1-2 hours prior to the fireworks show. If you want a good spot with enough room for you and your tripod, go early and take a good book or something to entertain you while you wait.

Notice I’ve included the crowd to show perspective.

#11 Make sure you leave enough room in your frame to anticipate the height of the opened bursts. Adjust as necessary if you miss on the first shot – it’s a lot of trial and error and correcting. It’s often hard to tell where the highest fireworks will end up in the sky, you may want to try both horizontal and vertical compositions.

Try a vertical composition for an added sense of power, especially if you can get a reflection like this.

#12 It takes a bit of practice to time your shots when you hear the fireworks being released, so ideally you capture a few bursts.  Do some testing to see how many bursts is just right for your taste.  Try some with more, and some with less. Having too many may overexpose the overall image, so keep that in mind.
#13 Shoot into the eastern sky not facing west, if you want a darker sky. Here in Edmonton we are quite far north and even by 10:30pm in the summer the sky is not fully dark yet.  I’ve found that when I shoot into the sunset my sky gets too blown out and the lights of the fireworks don’t show up as well as they do against a darker sky.  So try and find a vantage point that has you facing east when possible if that’s an issue for you as well.

#14 Try some telephoto shots as well as the usual wide, try some close ups zoomed in tighter for something a bit more abstract. For this you will need to aim basically into thin air and try to anticipate where the bursts will open

Abstracted using a longer lens, I think they look like palm trees.

#15 if you have a zoom lens try zooming during the exposure and see what you get!  If you’re going to try this make sure you have focused at the most zoomed in point of the lens.  Try different technique including counting 1/2 the exposure before you zoom, or zooming right away and the last 1/2 is zoomed out. Try zooming fast, then slow. Try more bursts, or less. Get some city lights in the shot too.

ISO 100, f/6.3, 6 seconds – lens zoomed during the exposure.

Summary

The biggest tip I can give you overal is experiment with your settings to get the look you want. Use my settings above as a starting point, adapt to your situation and your camera equipment until you’re happy with the results.
Have a great time this summer trying these out and don’t forget to share your images of fireworks, and any additional tips you’d like to add.
Also Read: check out our previous post on How to Photograph Fireworks Displays.

How to Photograph Fireworks

By: Darren Rowse

Do you want to know how to photograph fireworks?
With New Year’s Eve just days away I thought I’d refresh this article in which I give 10 Fireworks Photography tips to help you get started.
Fireworks Displays are something that evoke a lot of emotion in people as they are not only beautiful and spectacular to watch but they also are often used to celebrate momentous occasions.
I’ve had many emails from readers asking how to photograph fireworks displays, quite a few of whom have expressed concern that they might just be too hard to really photograph. My response is always the same – ‘give it a go – you might be surprised at what you end up with’.

My reason for this advice is that back when I bought my first ever SLR (a film one) one of the first things I photographed was fireworks and I was amazed by how easy it was and how spectacular the results were. I think it’s even easier with a digital camera as you can get immediate feedback as to whether the shots you’ve taken are good or not and then make adjustments.
Of course it’s not just a matter of going out finding a fireworks display – there are, as usual, things you can do to improve your results. With 4 July just around the corner I thought I’d share a few fireworks digital photography tips.

How to Photograph: What you need to Know

Here are the steps you’ll need to work through to photograph fireworks:

1. Start by using a Tripod
2. Use a Remote Release
3. Frame Your Shot
4. Choose the best Focal Length
5. Select the right Aperture
6. Get your Shutter Speed Right
7. Set your ISO
8. Switch off your Flash
9. Shoot in Manual Mode
10. Experiment and Track Results

Let me expand on each tip in more detail below.
Note: Get more Digital Photography Tips like this in your email with our free newsletter

1. Use a Tripod

Perhaps the most important tip is to secure your digital camera to something that will ensure it doesn’t move during the taking of your shots. This is especially important in photographing fireworks simply because you’ll be using longer shutter speeds which will not only capture the movement of the fireworks but any movement of the camera itself. The best way to keep your camera still is with a tripod (read our series on tripods and how to use and buy them). Alternatively – keep in mind that there are other non Tripod options for beating camera shake.

2. Remote Release

One way to ensure your camera is completely still during fireworks shots is to invest in a remote release device. These will vary from camera to camera but most have some sort of accessory made for them. The other way of taking shots without touching your camera is to use the self timer. This can work but you really need to be able to anticipate shots well and its very very hit and miss (read more on remote shutter releases).

3. Framing Your Shot

One of the most difficult parts of photographing fireworks is working out where to aim your camera. The challenge you’ll face in doing this is that you generally need to aim your camera before the fireworks that you’ll be photographing goes off – anticipation is key. Here are a few points on getting your framing right.

• Scope out the location early – Planning is important with fireworks and getting to the location early in order to get a good, unobstructed position is important. Think about what is in the foreground and background of your shots and make sure you won’t have people’s heads bobbing up into your shots (also consider what impact you’ll have on others around you also). Take note of where fireworks are being set up and what parts of the sky they are likely to be shot into – you might also want to try to ask some of those setting up the display for a little information on what they are planning. Also consider what focal lengths you might want to use and choose appropriate lenses at this time (rather than in the middle of the show).
• Watch your Horizons – One thing that you should always consider when lining up fireworks shots is whether your camera is even or straight in it’s framing. This is especially important if you’re going to shooting with a wide focal length and will get other background elements in your shots (ie a cityscape). Keeping horizons straight is something we covered previously on this site and is important in fireworks shots also. As you get your camera on your tripod make sure it’s level right from the time you set up.
• Vertical or Horizontal? – There are two main ways of framing shots in all types of photography, vertically (portrait) or horizontally (landscape). Both can work in fireworks photography but I personally find a vertical perspective is better – particularly as there is a lot of vertical motion in fireworks. Horizontal shots can work if you’re going for more of a landscape shot with a wider focal length of if you’re wanting to capture multiple bursts of fireworks in the one shot – but I don’t tend to go there that often.
• Remember your framing – I find that when I photograph fireworks that I spend less time looking in my viewfinder and more looking at the sky directly. As a result it’s important to remember what framing you have and to watch that segment of the sky. Doing this will also help you to anticipate the right time for a shot as you’ll see the light trails of unexploded rockets shooting into the sky.

4. Focal Length?

One of the hardest parts of photographing fireworks is having your camera trained on the right part of the sky at the right time. This is especially difficult if you’re shooting with a longer focal length and are trying to take more tightly cropped shots. I generally shoot at a wider focal length than a tight one but during a show will try a few tighter shots (I usually use a zoom lens to give me this option) to see if I can get lucky with them. Of course zoomed in shots like the one to the left can be quite effective also. They enable you to really fill the frame with great color. Keep in mind however that cropping of your wider angle fireworks shots can always be done later to get a similar impact in your photography.

5. Aperture

A common question around photographing fireworks displays is what aperture to use. Many people think you need a fast lens to get them but in reality it’s quite the opposite as the light that the fireworks emit is quite bright. I find that apertures in the mid to small range tend to work reasonably well and would usually shoot somewhere between f/8 to f/16.

6. Shutter Speed

Probably more important to get right than aperture is shutter speed. Fireworks move and as a result the best photographs of them capture this movement meaning you need a nice long exposure. The technique that I developed when I first photographed fireworks was to shoot in ‘bulb’ mode. This is a mode that allows you to keep the shutter open for as long as you hold down the shutter (preferably using a remote shutter release of some type). Using this technique you hit the shutter as the firework is about to explode and hold it down until it’s finished exploding (generally a few seconds).
You can also experiment with set shutter speeds to see what impact it will have but I find that unless you’re holding the shutter open for very long exposures that the bulb technique works pretty well.
Don’t keep your shutter open too long. The temptation is to think that because it’s dark that you can leave it open as long as you like. The problem with this is that fireworks are bright and it doesn’t take too much to over expose them, especially if your shutter is open for multiple bursts in the one area of the sky. By all means experiment with multiple burst shots – but most people end up finding that the simpler one burst shots can be best.

7. ISO

Shooting at a low ISO is preferable to ensure the cleanest shots possible. Stick to ISO 100 and you should be fine.

8. Switch off your Flash

Shooting with a flash will have no impact upon your shots except to trick your camera into thinking it needs a short exposure time. Keep in mind that your camera’s flash will only have a reach of a few meters and in the case of fireworks even if they were this close a flash wouldn’t really have anything to light except for some smoke which would distract from the real action (the flashing lights).Switch your flash off.

9. Shoot in Manual Mode

I find I get the best results when shooting in manual exposure and manual focus modes. Auto focusing in low light can be very difficult for many cameras and you’ll end up missing a lot of shots. Once your focusing is set you’ll find you don’t really need to change it during the fireworks display – especially if you’re using a small aperture which increases depth of field. Keep in mind that changing focal lengths will mean you need to need to adjust your focusing on most lenses.

10. Experiment and Track Results

Throughout the fireworks display periodically check your results. I generally will take a few shots at the start and do a quick check to see that they are OK before shooting any more. Don’t check after every shot once you’ve got things set up OK (or you’ll miss the action) but do monitor yours shots occasionally to ensure you’re not taking a completely bad batch.
Also experiment with taking shots that include a wider perspective, silhouettes and people around you watching the display. Having your camera pointed at the sky can get you some wonderful shots but sometimes if you look for different perspectives you can get a few shots that are a little less cliche and just as spectacular. Most of the best shots that I’ve seen in the researching of this article have included some other element than the fireworks themselves – whether it be people, buildings, landmarks or wider cityscape perspectives.

More Tips from DPS Readers

• “Find Out the Direction of the Wind – You want to shoot up wind, so it goes Camera, Fireworks, Smoke. Otherwise they’ll come out REALLY hazy.”
• “Also, I find that if you shoot from a little further back and with a little more lens, you can set the lens to manual focus, focus it at infinity and not have to worry about it after that.”
• “Remember to take advantage of a zero processing costs and take as many pictures as possible (more than you’d normally think necessary). That way, you’ll up your chances of getting that “perfect” shot.”
• “Make sure you are ready to take pictures of the first fireworks. If there isn’t much wind, you are going to end up with a lot of smoke in your shot. The first explosions are usually the sharpest one.”
• “Get some black foam core and set your camera to bulb. Start the exposure when the fireworks start with the piece of foam core in front of the lens. Every time a burst happens move the foam core out of the way. You will get multiple firework bursts in one exposure”
• “Another tip I would add to this is pre-focus if possible (need to be able to manually focus or lock down focus for good) before the show starts so other elements in the frame are sharp They did mention that you only need to focus once but its a lot easier to take a few shots before the show starts and check them carefully rather than wait until the show has begun and you are fiddling with focus instead of watching fireworks!”

Tell us your fireworks display photography tips in comments below. Don’t forget to tell us which city you’re in and what the fireworks are like there!

UPDATE: Check out our 2nd guide to photographing fireworks with 15 great tips.

The July 4th holiday here in America is only a few days away...

8 Tips for Better Fireworks Photos

By: Rick Ohnsman 

If you’ve been to a great aerial fireworks display, I’m sure you’ve heard the “oohs” and “ahhs” of the crowd, captivated by the colorful spectacle. Here in the United States, the Independence Day holiday is when many of us try our hand at fireworks photography.  I’m sure if you live in other places in the world, you also have holidays celebrated with fireworks.  So how can you capture those moments in a photo and elicit those same “oohs” and “ahhs” from your viewers and achieve better fireworks photos?

Include a landmark, city skyline, or something in your fireworks photo to add interest, place, 

and story. This is a show over the Boise, Idaho Depot.

Great fireworks photos aren’t difficult, but you will not get them in Auto mode.  You will need to put a little thought into this and learn to take charge of your camera controls.  Try these simple tips, however, and I’ll bet you’ll come back with images that elicit “oohs,” “ahhs,” some likes, and maybe even “wows” from your viewers.
Here are the things we’ll cover for better fireworks photos:

1. Location
2. Equipment
3. Camera settings
4. Shutter speed choices
5. Using Bulb mode
6. Shooting technique
7. Boom Zoom Bloom FX
8. The “Black Hat trick”

After you’ve read this article, and made your fireworks photos, be sure to read Part Two – Creatively Editing your Fireworks Photos.

1. Location

You can make good fireworks photos with just an image of the colorful bursts in the sky. But great fireworks photos need something more – an interesting setting or foreground.
Think of displays you have seen taken with fireworks over the Statue of Liberty, the Sydney Harbour, the Chicago city skyline, the Golden Gate Bridge, or Victoria Harbor in Hong Kong.  What makes those shots over the top?  A couple of things;  iconic city skylines and landmarks, and most often, water.
Not only are there interesting things in the shot besides the fireworks themselves, but often with water in the shot, there’s the benefit of colorful reflections.
If you are lucky, the spot where you plan to photograph your fireworks display will also have interesting foreground features and perhaps a body of water.  If so, scout the area ahead of time so you can find a location to best capture those things.

You can pretty much count on a crowd at a fireworks show. Get there early to stake out your 

spot. Then consider including the location in some of your shots.

You can count on a crowd when you go to a fireworks show.  Plan on getting to your spot early so you can “stake your turf.” Perhaps put out a blanket to ensure an unobstructed view of the show.  Then, if you have no other foreground elements, consider the possibility of making the crowd your foreground, their heads silhouetted against the sky and fireworks.
Another possibility might be to find a less obvious location, not right where the fireworks will be launched.  Perhaps there is a landmark, a tree-line, a high vantage point, or some other spot that will create an interesting foreground that while still including the fireworks, will give context, place, and “story” to your photos.  Doing some scouting long before the night of the show is a good idea.

The first few fireworks of the show will be in clearer sky conditions. As the show continues, 

smoke may be more of an issue and the sky won’t be as dark with the fireworks lighting
the smoke.

2. Equipment

What will you need to make good fireworks photos? Let’s break down the basic equipment needs:

Camera

You can make fireworks photos with a cellphone camera if that’s all you have. However, the techniques will be different and the results likely not as impressive.
We won’t get into that here, so let’s assume you have a better DSLR or mirrorless camera with the option for manual control. Be sure to have a good-sized storage card, as well as a spare battery or two, as you’ll usually take lots of shots at a fireworks show.

Tripod

Fireworks photography will require a steady camera as you’ll be shooting in low light and taking longer exposures. Consider a tripod pretty much mandatory for this kind of work.  An L-bracket on your camera or at least a tripod that will easily allow going from landscape to portrait mode easily is a good thing too. Often you will shoot in both aspects.

Lens Selection

Lens choice largely depends on how close you will be to the fireworks launch location.  If you are really close, you may need a wide-angle to keep the larger bursts in the frame. If, however, you are a long distance from the show or want to compress the apparent distance between your foreground object and the sky bursts, a telephoto might be in order.
I typically use my go-to lens; a Canon EF 24-105mm f/4L IS as it covers a good range. You don’t need a particularly fast lens as you will be working with mid to small apertures and longer shutter speeds. Still, a sharp lens is always a good thing.

Cable Release/Remote trigger

The technique for photographing fireworks will be discussed in a minute, but trust that having a way to remotely trigger your camera will be a real help. One reason is you are presumably going to a fireworks show to enjoy the show.  Having your eye to the viewfinder and your finger on the shutter button the entire time will lessen  the enjoyment of “being there.” It will also introduce camera shake, something you don’t want.
A very basic remote release can be had for under $10.00 US. This is a great item to always have in your bag for many purposes.

The tree line at the bottom of the frame adds some additional interest.

3. Camera settings

If you’ve always worked in Program or one of the Auto modes with your camera, or even if you use Aperture (Av/A) or Shutter (Tv/S) mode, this will be the time to be brave and go to full Manual mode.
Here’s how you want to set up your camera for fireworks photography:

Raw Mode

Real photographers shoot in Raw mode. There are many articles why. If you never have done so before, here’s your chance to try it. You can work in Raw + Jpg if that makes you feel more secure. However, I’m betting you won’t use the .jpg versions.

Full Manual

As described. Be brave. You can do this.

White Balance

As you’re using Raw mode, (you are, yes?), white balance can be tweaked later so it doesn’t matter much what you set for shooting. I tend to leave my white balance in Faithful mode almost all the time.

Sometimes it’s fun to zoom in tighter and get the flurry of action.

Low ISO

Working in low light with dark or black backgrounds and long exposures will tend to introduce noise in your shots. Fortunately, the fireworks are bright, so higher ISO settings won’t be needed.  Instead, use the minimum (ISO 100 on many cameras), and you’ll be fine.

Noise Reduction Off

Many modern cameras have a noise reduction feature, which after the first exposure, takes a second “black frame” exposure, detecting the noise and then subtracting that from the initial exposure. It can work well, but…
The second exposure takes as long as the first, and if you’re making multi-second exposures (for example, that 6-second exposure now takes 12 seconds to finish), your camera will be busy working, and you’ll be missing subsequent fireworks.
Turn it off.  You’ll be using a low ISO with minimal noise anyway, and the delay in being able to make more shots isn’t worth it.

Aperture

There are two things to consider here:

1. How much depth-of-field do you need?
2. What is the “sweet-spot” of your lens?

First, because the fireworks will be a good distance from your camera, you will be focusing on something further away and likely have a pretty good depth of field. Working at wider focal lengths helps too. Plan on being at your location well before the show starts and have an idea where you’ll need to focus and how much depth of field you need.
Secondly, most lenses are at their sharpest between f/8 and f/16.  Learn where your lens performs best, the so-called “sweet spot,” and use that aperture if you can.

Most of the photos in this article were taken at the same show. Also, most were very close 

in their exposure settings such as this one at ISO 100, 10-seconds at f/8.

4. Making shutter speed choices

Your choice of shutter speed will be important in capturing good fireworks photos. You know when you hear the boom of the launched fireworks from its mortar that it trails up into the sky, explodes, and a beautiful shower of colorful sparks radiates out and trails down.
Often multiple fireworks are launched close together, each doing the same thing. What you’re after is to capture the entire event which can sometimes take several seconds.
You could pick a fixed shutter speed of, say, four seconds, but would that be too short? Too long? Of course, it depends on the individual firework duration or sequence you want to capture, and that will vary during the show.
So how do you choose?
The answer is, you don’t have to because there’s a better way.

Using bulb mode you will be able to hold the shutter open and capture multiple fireworks 

bursts, closing it when you like.  Note this shot is in portrait orientation.

5. Use Bulb mode

If you’ve seen pictures of early photographers with their view cameras, you might have noticed them holding a rubber “bulb” which when they squeezed, forced air through a rubber tube and tripped the shutter. As long as the photographer kept the bulb squeezed, the shutter stayed open, ending when they released it.
These were the first shutter remotes, and it was that rubber bulb that gave the mode its name.
Today we have wired, and sometimes wireless triggers that can do the same thing. Putting the camera in Bulb mode allows a variable shutter speed. As long as we press and hold the button, the shutter stays open.  Let it go, and the shutter closes, ending the exposure.
This is just the ticket for fireworks photography, a variable shutter speed.
So, let’s review our basic camera settings:

• Camera on tripod
• Raw Capture
• Manual Mode
• Noise Reduction Off
• Auto Focus Off – Focus on the anticipated fireworks spot and lock focus there
• Lens Vibration Reduction (VR/IS) Off
• ISO 100
• Approx. f/8 – f/16  (Use aperture and ISO to adjust if images are too bright or dark).
• Bulb mode
• No flash – I forgot to mention this one.  Rarely, (unless perhaps to light a foreground object), will you ever need to use flash when making fireworks photos.  Also, consider whether others are nearby watching the show.  Using flash is guaranteed to make you less-than-popular with other fireworks spectators.  Unless you are alone and have a good reason to use flash, (in which case I will assume you know what you’re doing), just don’t use it.

Set up like this, you’re good to go. Remember, once the show starts, you will be busy. If you are fooling with camera settings, you’ll be missing shots. You will want to try some variations, but you don’t want to have to struggle and miss the show.
Be ready, think it through beforehand, and when the show starts, start clicking.

6. Shooting Technique

You’ve set your camera up on a tripod, figured out where to point it, made sure to pre-focus on a distant spot and locked the focus by putting it in Manual Focus (MF) mode.
If you leave your camera’s Autofocus on it’s almost guaranteed to give you images that are a bust rather than a boom. Against the dark sky and the moving fireworks the focus will hunt, fail, and… it’ll just be bad. Don’t do it.
Often the best images can be made right when the show starts as later, smoke from the previous fireworks becomes thicker, and the fireworks more obscured. So, when you hear that boom of the first firework going up, click and hold the button on the remote. You’ll be in bulb mode so hold it open while the firework goes up, explodes, and radiates out.  Then release the trigger.
Now, quickly check your shot. Is it in focus and framed properly? Is it exposed correctly? If it’s too dark, increase the ISO a click or perhaps open the aperture a stop. Too light? Do the opposite.
Try not to spend too much time doing this as, of course, the show will continue without you.
If you’re in the ballpark, the ability to edit in raw gives you the tweaking room you need. The two unrecoverable mistakes you might make would be to have things out of focus or have the highlights so blown out as to be unrecoverable. Editing won’t save you if you do those things, so be sure the focus is good and if you’re not sure with exposure, underexpose a bit. Some fireworks will be much brighter than others – especially a multi-burst or the finale. So quickly check your histogram and be sure you’ve not clipped the right (highlights) side.
Make any tweaks you need and then keep clicking. Vary the zoom if you need to, but if anything, frame a little “loose.” You can always crop in tighter later. However, if that really big and spectacular burst is so big it goes out of the frame, you’ll have missed it. Try both some portrait and landscape orientation shots. Perhaps reframe to get different things in the shot, especially if you are including foreground elements.
If things are going well, it’s going to be a fairly long show.
And if you’re feeling frisky, you might be ready for some more advanced techniques.

Note how the bright pink burst appears here, thicker streaks at the base of each trail growing 

thinner at the tip. This uses what I describe as the “Boom Zoom Bloom” technique described.

7. “Boom Zoom Bloom” FX

You may have seen those photos where the bursting fireworks look more like a flower, fat blurry trails with sharp points.  How is that done?
Here’s the technique, which you can vary for different results.
Know this takes practice, and luck plays a big part. So decide if you have already got enough necessary shots before you try it and whether the show will last long enough for some experimentation.
If you’re game, here’s how you do it:

• You will need your hands free for this, and you’ll want to look through the viewfinder or perhaps use Live View, so using the remote release probably isn’t going to work. Instead, set your shutter speed for about 8-10 seconds, leaving all the other camera settings where they were.
• With your hand on the focus ring, remember your hand position there. Then turn the ring so things are out of focus.
• Just as the firework explodes, click the shutter and smoothly turn the focus right back to the focus point you memorized.  You have the time of the preset shutter speed to accomplish this.  If you finish early, that’s okay.

Two other images using the defocus-to-focus technique. Also note how some of the bursts, 

captured after the focus was performed but before the shutter closed, don’t show the same 

look combining two looks in one photo.

Now, try different things with subsequent shots. Go from focused to unfocused, zoom in or out during the exposure, or maybe take the camera off the tripod and move it during the exposure to make light trails. Play and see what you like.
Just remember, the duration of the show is limited, so try some experiments but also be sure you have some solid “keepers.”

8. The Black Hat Trick

I have to confess, I’ve not personally tried this but the concept is sound and could be fun. (I’ve always wanted to do a “hat trick.”)
Here’s how it’s supposed to work:

• Have a hat, a black one or preferably of something dark enough to be opaque. You will also need to be working in an area that is quite dark.
• Put the hat over the front of the lens.
• Have the camera in Bulb Mode and just before the firework launches, click open the shutter locking it open with the remote.
• Quickly, but gently so as not to bump the camera, remove the hat while the firework explodes.
• Leave the shutter open and carefully replace the hat. Repeat, removing and replacing the hat for multiple fireworks bursts. (You may need to have a smaller aperture or lower ISO to do this as you will be building up exposure brightness with each additional firework added).
• Unlock the remote and close the shutter when you’ve done all you want.

What you’re doing is making a multiple-exposure image in-camera. This should work. Of course, there’s also a way to do it in post-processing.  For that, and some other tips on how best to process you fireworks photo, come back for Part Two – Creatively Editing your Fireworks Photos.

There may be a frenzy of fireworks at the show finale. Keep the shutter open and capture it 

all if you can without overexposing.

Light the fuse

I hope you’ve decided that good fireworks photography is easy and go and have fun with it.  It’s one more way to enhance your camera skills and make some exciting images.
If there’s anything that’s a problem it’s that good aerial fireworks displays are seasonal in most places and if you really catch the bug, you may find there are not enough opportunities to practice.
So, find out when and where the shows will be near you, mark your calendar, do some scouting for the best locations, “light the fuse” and have fun!
Post your best shots as images in the comments – we’d love to see them.

Share this article.

P.S.  Want to learn more?  Copy and paste this link into your browser, then click "enter".
 https://resources.digital-photography-school.com/ref/937/